GUIDANCE FOR UNBOXING NEW GPS

Here are the steps for unboxing and setting up your new GPS device:

1. Open the Box Carefully: Gently remove the GPS device from the box, along with any included accessories (charging cables, mounts, and user manuals).
2. Check the Contents: Verify that all expected items are present and undamaged. Refer to the manual for a list of components.
3. Charge the GPS: Plug the GPS into a charger or power source if it’s not pre-charged. It’s best to ensure it’s fully charged before starting the setup process.
4. Power On the Device: Turn on the GPS by pressing the power button, usually located on the side or back.
5. Select Language and Region: Follow on-screen instructions to choose your preferred language, time zone, and region.
6. Connect to Wi-Fi (if applicable): Some devices require an internet connection for updates. Connect to a Wi-Fi network if prompted.
7. Update Software: Allow the GPS to download and install any necessary software or map updates for the most accurate navigation.
8. Calibrate the GPS (if needed): Some devices might ask you to calibrate the screen or sensors. Follow any on-screen prompts to complete this process.
9. Set Your Preferences: Customize settings such as voice options, display preferences, and units of measurement (miles or kilometers).
10. Test the Device: Enter a destination to test the GPS. Ensure it provides accurate directions and displays maps correctly.

Now you’re ready to use your GPS for navigation!

STEPS FOR UPDATING NEW GPS DEVICE

Steps for updating your new GPS device using a USB cord and a laptop:

1. Gather Equipment:
   • Ensure you have your GPS device, a USB cable (usually included), and a laptop with internet access.
2. Power On the GPS:
   • Turn on the GPS device and make sure it is ready for connection.
3. Connect the GPS to the Laptop:
   • Use the USB cable to connect your GPS device to the laptop. The device should recognize the connection automatically.
4. Install Necessary Software:
   • If prompted, install any software required for the GPS update (such as Garmin Express, TomTom Home, etc.). Follow the on-screen instructions.
5. Access the GPS Software:
   • Open the installed software on your laptop. The software should detect the connected GPS device.
6. Check for Available Updates:
   • In the software, look for an option like “Check for Updates” or “Device Update.” The software will search for any available map or system updates for your GPS.
7. Download and Install Updates:
   • If updates are available, follow the prompts to download and install them onto your GPS device. This process may take some time depending on the size of the updates.
8. Wait for the Update to Complete:
   • Allow the update to finish fully before disconnecting the device. Do not unplug the GPS during the update process to avoid errors.
9. Disconnect the GPS:
   • Once the update is complete, safely eject the GPS device from your laptop (using the “Safely Remove Hardware” option on your laptop) and unplug the USB cable.
10. Verify the Update:

• Power on your GPS and check if the maps and software have been updated by browsing through the menu or entering a destination.

Now your GPS is up to date and ready to use!